THAMES IRONWORKS, BLACKHEATH ROAD, ROAD VEHICLES

 Over the past couple of weeks I’ve written articles about various steam road vehicles which passed through or originated in Greenwich and the surrounding area.  Some of these were for individual transport and others were for a number of people and both were based on the sort of horse-drawn vehicle which was available at the time.  There were some attempts at setting up a public transport service based on these vehicles.  Although some of the ‘carriages’ could undertake considerable distances they all had problems which made then impractical for daily use  - including water and coal supplies and suitable road surfaces.  In addition there was some hostility from bodies which maintained roads because it was perceived they caused damage. It is thus difficult to find any which were made after the 1860s and most schemes had ended before1850.  So there is a big gap in time until we get to the next Greenwich based powered vehicle manufacturer.

There were a couple of big firms in Greenwich which produced powered road vehicles in the late 19th century and early 20th century and some experimental works.  This week I want to look at what was eventually an unsuccessful attempt to produce viable road vehicles in the last few years of what had been a major manufacturing company.

I have written before about Penn’s engineering works on Blackheath Road. They were on the site which is now generally called ‘Wickes’.  The first John Penn had opened the works in 1799 to make agricultural equipment.  His son was to turn the works into a premier manufacturer of marine steam engines and similar equipment with a worldwide reputation for excellence.  By the 1890s however the firm had begun to lose money, although orders were still coming in.  In 1899 they were amalgamated / taken over by Thames Ironworks. 

Thames Ironworks was also a major engineering company which was now losing ground to companies in the North and Scotland which could produce the same ships at lower prices because of lower wages.  Like’s Penn’s it had had an international reputation for excellence. It was based at the mouth of Bow Creek - directly opposite what is now the site of the Millennium Village. 

Since the 1870s Thames Ironworks had been in the hands of Hills family.   Every book which I have written in the past 16 years has included a chapter on Frank Hills - commonly known as ‘the Deptford chemist’ but with an important works in East Greenwich and much else.  He chaired Thames Ironworks from 1870 but had died in 1892.  It was a family misfortune that Frank’s two eldest sons died shortly after and his third son, Arnold, became Chair of Thames Ironworks until the company collapsed in 1912.  Arnold is well-known as the founder of West Ham Football club he was in many ways an unlikely figure to be found as a major industrialist.  He was a temperance and vegetarianism advocate who believed in ‘fellowship schemes’ between management and workers. Thus he was the exact opposite of his unscrupulous father.

Traditional work on both steam engines and warships was now limited and would soon be no longer relevant.  What contracts there were now going to the Tyne or Clyde where wages were lower.  However at Blackheath Road engines continued to be made, and warships were still ordered. But it was clear that in order to survive the company needed to diversify. 

Initially some of the Greenwich site was used for a new boiler works for the French Belleville company; there was also a steam driven electricity generator which led to much restructuring of the plant. West Kent Argus reported that the ‘new shops for engine and Belleville boiler work were probably the best of their kind in the United Kingdom’.   William Penn, the last member of the family to run the company resigned in 1901. Other companies throughout the country were beginning to manufacture road transport vehicles and Thames management must have seen this as a possible solution to the decline in the traditional manufactures.

 

A lorry was designed and a prototype made. This was said to be ‘identical in all respects with the vehicle which ran in the recent Commercial Vehicle Trials of the R.A.C’. It had a four-cylinder engine, and there was an exceptionally large radiator, which... has given the whole vehicle a rather heavy appearance. There was also a 15-cwt.petrol powered van ‘a serviceable-looking machine, fitted with a canvas tilt’.

 

These were shown at the Olympia Motor Exhibition in 1905. Soon after a new factory was built for what was to be called Thames Engineering Works. It was at the lower end of the Greenwich site and equipped with modern machine tools. The engines for these vehicles were built in Greenwich while thr bodywork was done elsewhere and Thames also set up a West End agency to handle sales. They continued to exhibit at successive Olympia motor shows what was called the ‘Thames Range’

 

A young apprentice employed at the works in this period was Barnes Wallis the future inventor of the Dambusters’ bouncing bomb. He remembered working on an early London taxi cab which was ‘suitable for London traffic, and conforming to the Metropolitan Police requirements ‘and ‘would do quite well for private service or better class hiring work’.

 

Wallis also remembered working on what he described as the first ever racing car built in England. I don’t know if this claim to be first such car is true and can find no reference in histories of motor racing.  However, in 1907, a newspaper report says that ‘W. T. Clifford-Earp, driving a  six cylinder Thames car annexed four world records’  …  ‘the  50-mile, mid 100-mile and one and two-hour records, and also established a record for 150  miles’.  In 1909 another report says  ‘a new world record’ was set for G.Palmer’s cord tyres by C. M. Smith on a  6 cylinder Thames car at Brooklands ...the most severe test to which motor tyres have ever been submitted.’

 

Meanwhile in Folkestone, of all places, in 1905 a Mr. Cann was in need of better vehicles for his London and South Coast Motor Service route between Hythe and Folkestone.  ‘He placed an order with Thames Ironworks, Shipbuilding and Engineering Company, for their  experimental motor coach built to seat 20 passengers’.  Apparently he liked the large driving wheel, and the six cylinder engine. A new model was delivered in 1906, but there were some initial problems but nevertheless Cann went ahead and ordered five more coaches and even more were added later.  Apparently the use of these vehicles continued on the south coast and coaches in service are seen in photographs credited to the 1920s.

 

They also provided public service special vehicles.  In 1905 members of the Lewisham Borough Council saw a demonstration of a means of destroying waste by a machine called The Clem, which completely pulverized thr refuse. There are also reports of vehicles for sprinkling water on streets and no doubt there were other such specialist equipment produced.

Many years ago I was given some drawings of various elegant motor cars by the late Patrick Hills – Arnold Hills' grandson.  He was very proud of these and said that they were the cars made by his grandfather’s company. In newspaper reports of Thames Engineering I have only ever found reference to commercial vehicles, lorries buses and some specialist vehicles for local authorities.  I don’t really know if these motor cars were ever made.

In 1912 Thames Ironworks, the parent company went into receivership following a stand-off with Winston Churchill, then First Lord of the Admiralty over the placing of orders in London where wages were high.  There was a great demonstration in Trafalgar Square by 10,000 East Enders protesting  at so many skilled shipyard workers being put out of work by the Company’s failure. I’m sure that there were great aspirations at Thames Engineering to produce efficient and saleable vehicles but what brought Thames Ironworks down was the failure of the shipbuilding business and the determination of government to place orders away from the Thames. The failure of the motors business was just collateral damage 

Strangely there are reports that in 1913 a double-decker coach constructed which resembled a stagecoach without the horse. This strange vehicle is exhibited in a Dutch Museum, and has been widely illustrated.  https://www.louwmanmuseum.nl/en/car/thames-47-hp-motor-stage-coach/

In May 1913 the Blackheath Road site was put up a sale by auction and was sold to Messrs. Defries, the lighting specialists.  However it is said ‘nothing came of the project’ and, sadly there are soon reports of problems of a financial and probity nature

MERRYWEATHER - FIRE ENGINES, TRAMS AND

 In the past five articles I’ve been talking about manufacturers and experimenters with mechanically driven road transport in Greenwich in the 19th century. The majority of these vehicles were steam powered and most seem to have replicated private coaches and carriages with some experiments with making public service vehicles.  Last week looked at early 20th century attempts to build commercial vehicles and public service vehicles at what had been Penn’s works in Blackheath Road.  This week I need to return to the 19th century and look at a firm which, rather surprisingly, was making engines for public service vehicles at quite an early date.

We all know Merryweather’s as a manufacturer of fire engines.  However their fire pumps were carried on horse-drawn vehicles until the 1890s while from the 1870s they made steam powered trams.   Their first tram engine was actually made in Clapham before they moved to Greenwich in 1876. 

In 1872 a Croydon-based engineer, John Grantham, had designed a steam tram: it was a four-wheel double deck car with a two cylinder engine. The prototype was built by the Oldbury Railway     Carriage and Wagonn Company while the steam engine which powered it was supplied by Merryweather & Sons. After some problems, including modifications to the engine, it went to the Wantage Tramway which took passengers between the town and the station

Merryweather’s  moved to Greenwich in 1876.  Many people will remember their works in Greenwich High Road and today new buildings stand in what is now called Merryweather Place. It had a long Art Deco frontage but despite strong protests about its demolition and a lot of very hard work by local peopletry and save this, and get older parts of the factory listed, because it had been rebuilt following Second World War bombing it could not be listed and saved.

Having moved to Greenwich in 1856 Merryweather’s continued to make trams - I assume they made the bodywork as well as the engine although that is a bit unclear.  Most of these vehicles were sold abroad.  Between 1875 and 1892 the factory produced about 174 steam tram engines, of which only 41 were used in Britain –they included 46 for Paris, 6 for Kassel Germany, 15 for Barcelona, 15 for the Netherlands, 11 for New Zealand and 15 for Rangoon.

One of the problems for using steam trams in England were the rules and regulations and the need to apply for and get permission from the Board of Trade.  There was also what we now call ‘the Red Flag Act’ - where steam vehicles on public roads were limited to very low speeds and had to have a man walking from with a red flag. This had originally been passed after complaints from the Turnpike road authorities and others who had to maintain roads, about the damage done by heavy steam vehicles.

A Parliamentary Select Committee was set up to try and look at how public service vehicles could be used on ‘common roads’. As part of this enquiry the Committee visited a tramway on which a steam locomotive had been running. This was the North Metropolitan Tramway Company's system between Stratford and Leytonstone, and the machine shown was ‘the well-known Merryweather steam tram engine .... many of which type have been working the regular traffic on lines in Paris for several months past, and with the most satisfactory results’. Mr. J. C. Merryweather and Mr. H. Merryweather  were present to see ‘The run most successfully performed, though the capacity of the engine was severely tested’. The committee were told about Merryweather’s contracts for ‘tramways at Barcelona and Cassel, which latter line is under the special patronage of His Imperial Highness the Crown Prince of Germany’.

In the same year that the enquiry took place Merryweather’s sold one tram to the National Rifle Association in Wimbledon. This was take participants to the site of the shooting competitions on specially laid track which would be removed at the end of the competition

It would be interesting to know how these vehicles - assuming they were exporting the entire vehicle and not just the engine -went from Greenwich High Road to Brazil, or wherever.  Obviously they went by ship but leaving  from a wharf on Deptford Creek seems unlikely as a ship which was going to cross the seas to South America would not really  been able to get that high up the Creek. So there must have been some transshipment process where such vehicles could be loaded onto ocean going ships.

There is said to be only one Merryweather tram stlll in existence.  It dates from 1881 and and is in a transport museum in Utrecht. https://www.spoorwegmuseum.nl/en/ontdek/de-collectie/our-trains/rstm-2/ n

Merryweather’s continued to make horse-drawn fire engines until the 1890s.   Reports of late 19th-century fires in the press have a great feeling of excitement as appliances from fire stations around the area come galloping up with heroic firemen waiting to jump off and start pumping water. These days we have no idea who our firemen are or who command them  In those days each local fire chief was well known and each one was a hero. The head of the London Fire Brigade was a major figure.  The Fire Brigade Chief James Braidwood was killed in the 1861 fire in Tooley Street at London Bridge and thus became a national hero. There is a plaque to him on the corner of Battle Bridge Lane and Tooley Street.  He was replaced by the romantic figure of Eyre Massey Shaw who - as I mentioned in my book on the Creek - is mentioned in the Gilbert and Sullivan opera, Iolanthe, and took a bow on the first night when he there was with a lady who was not his wife.  …. and one day I will write about firefighter, the Duke of Sutherland.

 In 1899, Merryweather produced the world's first ‘self-propelled steam fire engine’, the 'Fire King'; which was for Port Louis on Mauritius. By 1907 twenty-one Fire Kings were in operational use around the country, including one with the London Fire Brigade. A modified Fire King was stationed at Whitefriars Fire Station in the City of London - it could go at a speed of 20-30 mph but was unable to negotiate a significant gradient without stopping to build up a head of steam

The first motorised fire engine in London was a Merryweather appliance delivered to the Finchley Fire Brigade in 1904. It was commemorated in April 1974 by the issue of a 3.5 pence Royal Mail postage stamp. The actual vehicle is preserved in the Science Museum store at Wroughton in Wiltshire. It was fitted with a Hatfield petrol pump, which was the first fire pump powered by a petrol engine and capable of delivering 250 gallons per minute.

I am not sure if the fire float Massey Shaw counts as a vehicle in terms of this article - which is about road transport in the 19th century. Massey Shaw was constructed by boatbuilders in the 1930s and she has even engines.  However she is associated with Merryweather for her pumps which have thrown river water up to great heights in a decorative way whenever her crew wanted to celebrate something.  She had an important role with a long history of attending fires in the River Thames  both in wartime and peace. She is well known for her her role in the Dunkirk landings  and led  the flottils of small boats back up the Thames to the London Fire Brigade jetty.

One oddity at Merrywearhes was their manufacture of what has been called the 'first car’.  In 1888 they built the Butler Petrol Cycle - a three-wheeled petrol vehicle. Edward Butler had been investigating a number of similar projects and had worked for a number of local firms – but not for Merryweather.  In 1887 he had patented a petrol driven tricycle and placed an order with Merryweather to manufacture a prototype, which they duly did.  Tests on it were not particularly successful and it appeared that its use would have contravened the ‘red flag’ acts.  Butler went on to other researches with other firms and manufacturers.   I have a long and detailed article about Butler by L.R.Higgins, which I understand is deposited in the Bexley arch

ROAD TRANSPORT - GENERAL

 


Nineteenth century Greenwich was home to any number of innovative engineers – with a reputation for skilled metal working. Most famous are the armaments made in the Royal Arsenal and the steam engines made at establishments like Penn’s on Blackheath Hill but also there were many smaller firms. It was also an area where experiments in such devices were sometimes tried out – and this included mechanical road transport devices.

 

Inventors in the late 18th and early 19th century wanted to apply the developing technologies to road vehicles. One of the earliest and most famous was the working model steam car made by William Murdoch in 1782. Although was in Cornwall it was described and popularised by Blackheath resident, writer Samuel Smiles.  Locally, from the 1820s onwards, some roads were - well, almost - buzzing with newly invented vehicles.   Most of them were steam powered and while they were developed as the same time as railway locomotives, they were lighter and smaller and, perhaps, more sophisticated. 

 

The idea of steam road transport had been around a long time. Another early inventor from Cornwall was Richard Trevithick. He came to London in 1803 bringing with him a steam locomotive which he had developed in Cambourne and which had been demonstrated on roads there. The original model was burnt out when Trevithick and his friends were in the pub eating roast goose a couple of days after Christmas.  Later he demonstrated locomotives in London – I have seen a replica of his vehicle in Dartford, where he was living at the time of his death.  

 

Deptford Greenwich and Woolwich were on the main Dover Road and a test for newly developed vehicles might be able to ascend Shooters Hill –not only on a main road but steep and well known. Many vehicles which were developed elsewhere were tried and tested here.  Inventors needed publicity for their carriages and it was a very good advertisement to be seen taking the new vehicle over a difficult piece of public road, so Shooters Hill was a firm favourite.  We need to remember the description of the road up Shooters Hill in Dickens’ Tale of Two Cities - the novel was written in 1859 but set in 1775 - ‘he walked uphill in the mire by the side of the mail as the other passengers did  ... with drooping heads and tremulous tails [the horses] mashed their way through the thick mud ... there was a steaming mist in all the hollows ... a clammy and intensely cold mist   .... A loaded blunderbuss lay on the top of six or eight loaded horse pistols, deposited on a substratum of cutlasses'.

 

An early powered vehicle which ascended Shooters Hill seems to have been that built by Samuel Brown.   It was, however, not a steam car – and the Samuel Brown involved was not the distinguished Blackheath resident associated with various types of chain manufacture. I must admit to having confused them in past articles, and I’m sorry about that.

This, other, Samuel Brown was a cooper whose patents included improvements to machinery for manufacturing casks. He lived in West London, in Eagle Lodge in Brompton, between 1825 and 1835, and the road vehicle he developed there was tested by driving it up Shooters Hill on 27th May 1826.   It was powered by 'the first gas engine’ - unlike many later vehicles which climbed the hill it did not use steam but was powered by gas, perhaps coal gas or the vapour from commercial alcohol. The engine was known as a 'gas vacuum’ and has been claimed as the forerunner of internal combustion.   The car itself had four wooden wheels, a small seat for the driver and very little room for anything else on top of a gigantic engine.  It climbed up Shooters Hill very slowly but 'with considerable ease'. 

 

In the 1820s many people thought that Mr. Brown's carriage and others would never be able to go uphill because of something they called 'perpendicular resistance'. The drive up Shooters Hill was to disprove this once and for all. Reports said ‘this precipitous surface experiment demonstrated that perpendicular resistance could be surmounted’. Mr. Brown's car went up the hill it all right - and plenty more were to follow it.

 

There had been concern about the weight of the vehicle and the load it could carry as it went up the hill. However it was reported that seven people sat on the shafts and it ‘appeared to make no difference to the motion’.  Then ‘some sailors who were accidentally passing’ surrounded the engine ‘and expressed their amazement at its impelling power’.  They ‘put a young chimney sweeper on the board which corresponded to a coach box on an ordinary coach’ and he ‘became the first conductor of a heavily laden vehicle up Shooters Hill without the agency of horses’.

 

Shooters Hill had recently had a new road surface laid down to help coach wheels get a purchase at the point where these experiments took place. It was also thought that a steam powered vehicle could only be used on a slightly inclined surface.  However Mr Brown’s gas powered invention was shown to be able to work on the road in the roughest of conditions. It was also pointed out in reports of the ascent that a steam engine explosion would ‘produce considerable mischief’ but this ‘pneumatic engine would not explode in such a manner’ and ‘there cannot be any scattering expulsion of its fractured parts’.

 

Brown's ride up Shooters Hill has been given very little attention in histories of motor transport although it was well reported at the time in the technical and national press. It was very early in the history of powered road transport and, in some ways, isolated from the later development of the internal combustion engine. Clearly it has not been described in histories of steam transport because steam was not used. 

 

After this experimental trip Brown himself seems to have abandoned the idea of using the system for a road vehicle and adapted it to be used for powering boats. The 'Canal Gas Engine Company' was formed by a group of entrepreneurs to exploit the engine for use in vessels on the Croydon Canal – the canal which ran from New Cross to Croydon and which became the route of the London Bridge/Norwood Junction railway line. The canal was not a success and the gas engine project floundered with it.

 

Brown was not the only person in Greenwich trying to put powered vehicles on the roads in the 1820s. Another, more local, inventor was working on a steam carriage. John Hill came from Greenwich.  He may have been the John Hill from Creek Street, Deptford but 'John Hill' is a common name. His partner in the steam carriage project was a Timothy Burstill who came from Edinburgh and was, of course, a competitor in the 1829 Rainhill Trials for an effective railway locomotive. His entry there was with 'Perseverance' - said to have been  'no more than a glorified domestic boiler'.

 

In London Burstill and Hill made a very heavy, 8 ton, road steam carriage with a very large boiler. This meant that it was very slow and could only do, at the most, three or five miles an hour.   They found it difficult to get passengers because, it emerged,  people were scared of sitting close to the enormous boiler and as it turns out, with good reason,

 

They were quite right to be afraid because this boiler eventually exploded during a demonstration run in Kennington outside 'New Bedlam', today that's the Imperial War Museum. What happened is a good example of what the writers on Brown’s non-steam engine said about the dangers of steam. The carriage was 'making a short turn, in order to get into the public road, when one of the wheels stuck in a piece of soft ground, the fore wheels being locked at the time, and the steam being generated faster than expended, the boiler burst, with a great explosion’.  No one was badly hurt in the accident although two people were taken to hospital.  Twenty three people were standing nearby 'on the bank' and one man had his foot on the machine itself.  Burstill and Hill claimed that the fact that no one was killed showed how safe the engine really was!  No more was heard of it.

 .....................................................

Last week I wrote about some of the first powered road vehicles and how experimental vehicles went up Shooters Hill to demonstrate what they could do, including that of Samuel Brown.  I also mentioned some of the earliest steam propelled vehicles.

Steam carriages like that of Burstill and Hill were experimental and none of them ever ran a regular public transport service. This changed in the late 1830s when new carriages came on to the roads which were designed to hold fifteen or more passengers and run an 'omnibus' service.  

At this time there seems to have been considerable interest in providing a fast, safe and regular service between Greenwich and London. The eventual winner was the London and Greenwich Railway, built in 1836 and still running. Many people will have used the river boat services but Shillibeer’s horse drawn omnibuses on the road were competition for river transport and speculators hoped steam road vehicles would also be competitors for this market.

 Shillibeer’s horse drawn ‘omnibuses; appear to have running between Greenwich and London Bridge in the early 1830s in what was a growing market.  Advertisements stress their comfort and safety.  However from newspaper reports it is clear that Shillibeer was in financial difficulties from the early 1830s, well before the railway opened.  There are also reports of problems with bus drivers - one report in particular describes the driver of a horse bus so drunk that the police of the day tried to prevent him from continuing and tried to remove him from the driver’s seat.  He took off at high-speed to evade them only to crash the bus which killed one of his horses

 Another Company running a horse bus service between London and Greenwich was Wheatleys. I know very little about their origins but in 1838 they were was licensed to run eight vehicles a day from Woolwich to Charing Cross and sixteen to Greenwich and in 1849 this was expanded to running six vehicles from Woolwich to Deptford with stops at Greenwich and Charlton.   They rented fields on the Peninsula from Morden College for grazing and rest for their horses.

 One of the most successful builder of steam road vehicles, whose carriages made long regular runs, was Goldsworthy Gurney. He seems to have had no connection with Greenwich but some of his carriages were adapted for a proposed run here.  He had built a carriage in 1826 which was about 20 feet long and would take six inside passengers and fifteen outside. It will be seen that these were on the same principle as a stage coach and designed for carrying passengers on service routes - not as individual private transport.

 Gurney's carriages were being used in the Gloucestershire area by Sir Charles Dance where the service encountered a great of opposition from both stage coach proprietors and the Turnpike Trusts.  A Parliamentary Committee examined the subject of steam carriage services and found in favour of them, but a Steam Carriage Bill could not be got through the House of Lords.   It must, however, have seen likely that suburban services were a better possibility.

 In 1831 Dance went to the engineering firm of Maudslay, Son and Field, then based at Waterloo - they later opened a ship building and boiler works on Greenwich Marsh. Dance asked Maudslay to make Gurney’s carriage more powerful and this was done.  During the autumn of 1833 this rebuilt vehicle made a number of test runs from Maudslay's works in Waterloo. With a party of fifteen observers on board they went to Merstham on the Brighton Road and visited Beulah Spa and some other spas in the Sydenham area. Whether they strayed into Kent during this period must be a matter for speculation - the vehicle was, however, intended for Greenwich roads.

 In October 1833 Dance's new carriage ran for some weeks between Waterloo Bridge and Greenwich.  It was said that it was not intended that this should be a proper public transport service so ordinary people were deterred from using it by the price of tickets - 'half a crown for tickets each way'.  ‘Half a crown’ was an eighth of a pound – about 12 ½ pence.  That was the end for this brief omnibus service which did not continue and there seems to be no record of what happened to the carriage.  The service must have failed for reasons which were not made public.  However it is the only recorded steam bus service between London and Greenwich which actually ran and which was well-publicised with pictures and narratives of how successful it had all been.

 A year or so later another omnibus service ran between London to Greenwich using coaches built by John Scott Russell.  Russell was Scottish and these carriages had been designed and built by him in Edinburgh. They had been used for a service between Glasgow and Paisley but in the summer of 1834 one of the carriages had overturned.  It was later said that this was because the turnpike trustees in Glasgow had put extra thick layers of stone on the road to stop his carriages running. As a result five passengers were killed and the Scottish Courts forbade him to run the carriages again in Scotland.   So, unable to use them in Scotland, Russell sent two of the carriages by ship to London for use in trips to Greenwich, Kew and elsewhere.

 For this service on these, rather compromised, carriages the fares were kept cheap. The vehicles had to haul a tender full of coke along the road with them and pick up water at places along the way as they went.  Scott Russell himself came to London to live in 1838. He was to become an important ship builder - he designed the Great Eastern - and he eventually lived in Sydenham.  It does not seem to have persisted with the omnibus service to Greenwich and after an attempt to sell the carriages no more was heard of them.

 There were probably several inventors trying to design steam road carriages. In 1834 Francis Maceroni - more of him in a future article - gave a list of steam carriage builders whose vehicles ' would not move at all'.  This is just a list of names without details and many have not yet been traced.  One who may have a Greenwich connection was ‘Mr. Joyce’. William Joyce owned an engineering company at the Kent Ironworks in Greenwich where he designed and made a successful steam engine. Kent Ironworks was situated on the first site on the right after crossing today's Creek Bridge from Deptford.  Joyce probably started in work in Greenwich in 1841 when he acquired part of an old gas works site but whether he is the Mr. Joyce mentioned by Maceroni and whether this abortive steam car was made in Greenwich is not known. 

 The most successful of the steam carriage builders of the 1830s was Walter Hancock who designed and made vehicles in Stratford, east London.  Hancock was one of a most interesting family - his brother, Thomas, has been called  'the foremost rubber technologist in England' and was a partner of the, better known, Mr. Charles Mackintosh.  Another brother, Charles, was responsible for the first use of gutta percha which was to revolutionise Thameside cable manufacture.  Walter Hancock was happy to advertise his brother's products by his 'flexible tubing' to suck up water for his steam road vehicles

 Walter Hancock was the only one of the early road vehicle inventors who designed a locomotive which could go through crowded London streets on busy days.  Some of his coaches may have run in an omnibus service to Greenwich - but accounts of what happened are often confusing and contradictory and I am afraid that I now think a service to Greenwich was unlikely, and must apologise for having said in previous articles that he did run a service. Hancock's coaches all had identifying names - one was even called 'Autopsy'.  A coach called 'Era' is shown in illustrations, dating from 1832, apparently and advertising a service between London and Greenwich.

Era was built by Hancock for a body called the London and Greenwich Steam Carriage Company.  It appears that separate companies had been set up to run omnibus routes - onof them, for instance, was the London and Paddington Steam Carriage Company. These companies, ostensibly different, all seem to have had most of the same people behind them.  The London and Greenwich Steam Carriage was not a Greenwich based company but a body set up in London which wanted to run an omnibus service to Greenwich and I must admit to not being able to find a contemporary source reference to it.

A number of writers have said that the engineer of the London and Greenwich Steam Carriage Company was D. Redmund, who was based in City Road, Islington and there are conflicting accounts of exactly what happened. Redmund is said to have ordered a different vehicle - called Enterprise - for Greenwich from Hancock.  When Enterprise arrived Redmund took it to pieces and noted down all the dimensions. He then began to build another carriage himself - called Alpha - which was an almost complete copy of Enterprise.   The vehicle ran some test runs but never seems to have gone into service. 

Hancock himself is said have made 'Era' for work in Greenwich. It may be that the problems which Hancock had with David Redmund meant that the vehicle never acts of actually ran a service. ‘Era’ carried sixteen people sitting inside and two outside. In addition there was crew of three - the driver, the engineer and a lad.  There were two engines for the engineer to manage.  The 'lad' stoked the boiler with 'common gas coke ' - that is coke bought from the gas works. 

Hancock also built a carriage for a London to Brighton service and made several well publicised trips to Brighton. He seems to have worked with Moses Ricardo – brother of the economist -and with a Mr Busby, a local builder. This seems to have eventually come to nothing but some authorities say that the coaches only ran as far as Greenwich; again I can find no press reference to this and in any case Greenwich is not on the route that a vehicle would take in the 1830s between West Ham, where Hancock’s workshops, were and Brighton.

Potential passengers, worried about a boiler explosion, were assured that ' the only parts of the boiler which can be dreaded are the sides - but good ties will keep them together'   and, as for the rest of the boiler 'its power of doing mischief is not worth notice'. The drawing of 'Era' shows a comfortable looking vehicle with a driver at the front and the engine completely shielded from the passengers. There is a grand crest on the side of the coach which perhaps meant to imply some sort of aristocratic patronage. 

Hancock made a number of very successful steam omnibuses some which on service routes for some time. However he seems to have made little money and gave up work in the late 1830s.  It is to be hoped that 'Era' did see some service on the road to Greenwich but it is more likely that she never got beyond the stage of running trials.  In 1832 the line which was to become the London and Greenwich Railway had already been surveyed and, when complete, may well have provided competition which Era could not have met.

 By the end of the 1830s steam road transport was a reality. Kentish roads had already seen some experimental vehicles and attempts to run public services.  The first years of the next decade would see attempts to make vehicles in Greenwich and witness their first trials around Kent.

 GW



Royal Hospital for Seamen

  





The Royal Hospital for Seamen was opened in 1692 built on the ruins of what had been the Royal palace.  The Hospital and the successive institutions which have used the Greenwich buildings have been an important part of the town.   We should also however keep in mind that the Royal Hospital very much still exists and that it continues to administer its Northumberland holdings and mining interests. These now support their public school near Ipswich.  In Greenwich Park and often overlooked, is the remains of the water supply system which runs underground in conducts with some visible remaing structures.



Morden College


Morden College was founded as an alms house in 16
80 and would thus appear to be of minor interest in industrial terms. It was, and is, however a major land holder and on the Greenwich Peninsula has been a prime mover in the administration of industrial development there. 

Royal Observatory



The Royal Observatory in Greenwich was set up in 1675.  As a major institution of scientific research it was the first of several such bodies in the area.  Clearly scientific research of a different nature was undertaken in the Arsenal and the Royal Military Academy.  It should be noted that the Astronomer Royal would often be present at gatherings of academics from these institutions.  In the 19th and 20th centuries commercial organisations like Siemens undertook considerable scientific work as did the gas industry – which included the Fuel Research Institute.  It may also be that the Observatory was the reason for various scientific instrument makers in the Greenwich area – including Stanley’s of New Eltham which survived the closure of the Observarory in the 20th century.   

Royal Arsenal


In Woolwich the earliest parts of the Arsenal date from this time.  Tower House had been built on Woolwich riverside an area called The Warren in 1545. Nearby was Gun Wharf used by the Board of Ordnance and an area adjacent to the house which had been used by the government for proving guns. A riverside terrace and battery was built here and the land itself was purchased by the Board of Ordnance in 1671.   In Greenwich a barn on the site of the disused tilt yard was used as a ‘laboratory’ and for the manufacture of fireworks.  It was moved to Woolwich in 1694 as the site was taken for the Royal Hospital. This was the start of munitions manufacture on the Arsenal site.  The Royal Laboratories were opened in 1696 and the recent renovated buildings still stand as the earlies extant buildings in the Arsenal.  They are possibly the oldest surviving purpose built industrial buildings in London. 

The legacy of the Arsenal itself is obvious – the major role it has played in both the manufacture and research on weapons and in many cases their civilian applications. Almost certainly the largest factory in Europe by the early 20th it has also left a heritage of amazing buildings, now largely converted to housing.

 

Copperas Deptford



One of the most important industries to date from the 17th century was the copperas works on Deptford creek.  This was described in a paper given to the Royal Society in 1678 and thus has become a benchmark for information on this early chemical industry. The works was then owned by Sir Nicholas Crispe and continued, into the mid-19th century when it was owned by the Pearson family and it marks the start of an important chemical industry on Deptford Creek.  Copperas is nothing to do with copper. It is the distillation of liquid in which iron pyrites, picked up on the shores of the Thames estuary, has been soaked. It can be used to manufacture sulphuric as well as a series of dyes and other substances.  Sulphuric acid is the basis of many other industrial activities and has been described as “the bedrock of the industrial revolution” and in 1843 it was said that “the measure of a country’s civilization lay in the amount of sulphuric acid it consumes every year”.  

Copperas was a ground-breaking and important Greenwich industry. In the 17th century scientific research and the manufacture of munitions joined an already flourishing shipbuilding sector. This was just the start of the innovation in industry over the next three centuries in the area now covered by Greenwich Borough.   There was so much going on – does this explain why our area had a population which matched the biggest provincial cities in the 17th century?

GW ??? 

Angerstein Railway -

 The Angerstein Railway


 There is a dividing line between Greenwich and Charlton on the riverside – last week I looked at the roads and banks there – now it’s the turn of at the Angerstein railway

 I know that I have written about the Angerstein railway line in four of my previous books and many, many articles - but I do feel I need to say something new here – and I will try to make it interesting.  If I am going to write about Charlton industry a good place to start is all the works which were joined up to the national railway system via the Angerstein Railway. So I will try and concentrate on them, but, first, an update and some crucial points.

 Briefly – and for those of you who don’t know the background to the line.  It is a goods only railway which runs from a junction where the main railway line between Charlton and Westcombe Park Stations meets the line coming from the Tunnel under Blackheath from Blackheath Station. 

 The Angerstein Railway was built in 1851 on land belonging to the Angerstein family and leased to the South Eastern Railway from the start.  It has always been a goods only line serving riverside wharves.  (Apart, that is, very rarely there are special trains for train spotters). 

 The Angerstein family came to Greenwich when John Julius Angerstein built the house, Woodlands in 1774. It’s now in use by the Steiner School.  John Julius was a City financier with fairly mysterious roots. He has been the subject of considerable scrutiny lately because of his links to slavery. This has particular significance because of his role in the foundation of the National Gallery who have undertaken a vast amount of research on him. There is a page on the Gallery web site which says that research is ongoing about his role in marine insurance (which included slave ships) and as an appointed trustee of various slave related projects. https://www.nationalgallery.org.uk/people/john-julius-angerstein.  On a different page they describe some of his charitable work in relation to the setting up of Sierra Leone. I am also aware of a huge report on this which demonstrates the complexity of his various roles – and also asks about the amount of responsibility incurred in professional administration as distinct from personal wealth creation.

 However the railway was built by his son, John, and I am not aware of any research at all into him and I do not know what he inherited from his father.

One of the interesting things about the railway is its tiny unsupervised level crossing between Fairthorne Road and Farmdale Roads.  It’s something you would hardly believe is in inner London or even in the 21st century.  Despite the obscurity of the crossing, residents of new housing in Charlton have used it increasingly to get to Westcombe Park Station.  A couple of Years ago Network Rail suddenly declared that it must be closed as such crossings were now not allowed.  Users pointed out that the eight or nine locomotives which used the line every day travelled at very, very slow speeds and that the drivers had a good view of the crossing. The only known accident was in 1912. Network Rail said people might try and crawl under stationary locomotives. There were public meetings, threats of legal action and much, much more.  Just as suddenly Network Rail changed their minds – the crossing remains.

One thing which came out of the historical research into the line was that the crossing was at a point where workers from what used to be Coombe Farm in Westcombe Hill went on a footpath to access fields – and later to get to a chalk pit and works on the other side.  Old maps appeared to show a tunnel under the line and investigators pointed out that a sort of tunnel still exists under the crossing. It is also amusing to read all the accounts by various rail bloggers and London explorers who came down to look at the crossing and put their video on the net – and everyone of them gets something wrong!

These days the line is used by a number of firms who are based at Angerstein Wharf, at the end of Horn Lane, or nearby.  They are almost all dealing in aggregate, some of which comes in to the wharf by boat. I have been told that they are all very busy and are looking to expand. Some of the trains which use the wharf take very, very circuitous routes to get to the line and there are specialist web sites which can be followed giving their timetables. I am also told that goods transport by rail is very busy but hardly mentioned in reports on our railways. 

Up until the 1970s the line was used by several manufacturing industries which rail connected to it, I will come to each of them in more detail in time. Probably the largest of them was United Glass – on the site of which is now the Sainsbury Depot. This was a very big and busy works but it closed in the 1950s. 

Back up the line between the Blackheath Tunnel and the junction to Charlton Station was the

The South Eastern Railway=s signal works on the site of an old chalk pit now used for the police car pound.

Close up on east side of the line and connected to it was the London County Council’s, Central Tram Repair Depot.  Mr. Fell was its general manager and it was in what is still Felltram Way. People may remember it as the ‘Airfix building’ – when, after the trams had gone, A I R F I X, was written in gigantic letters on the line of north lights. Next to them was G.A.Harvey’s Greenwich Metal Works on the site of the new fire station in Woolwich Road.  They basically made holes – and I will get to them later too.

I have said I was going to talk about Charlton – and that the railway is a boundary between it and Greenwich to the west. Most of the rail links via Angerstein went to the east – but one line went west towards Greenwich – to the gas works – and I thought it only fair to mention that too.

Before it reached the gas works it passed the site of the Redpath Brown B Riverside Steel Works - which was on the site between The Pilot and the Millennium Village.  I have seen and heard a lot of people say Redpath’s used the railway – and I don’t disbelieve them - but there is no map which shows an interchange, and this includes a works plan given to me by an ex manager. 

 The line to the gas works ran roughly parallel to what is now West Parkside. It was on an embankment and there was a bridge over the road close to The Pilot pub.  It was still there in 1998 when the Dome was planned although it has been unused for many years.  The builders of the Dome used it as a special road to get lorries in and out of their site while it was being built – and then demolished it.  So – if you think rail access to the Dome would have been a good idea, you know now why it doesn’t exist.  Many transport enthusiasts campaigned for it to be upgraded and remain - but no, it went.

 This western extension to the line was basically built for East Greenwich Gas Works but did not access the Angerstein line until 1903. This very large gas works had a large and complex internal rail system – which is described in great detail in an article by Malcolm Millichip. (East Greenwich Gas Works Railway. Railway Byelines 11/1998).  On the tenth page, of this ten page article he finally devotes a short paragraph to the connection of the works’ railway system to the Angerstein line and the outside world. In fact, anecdotally, it seems likely that the gas works made little use of this rail link since all coal was delivered by specialist collier ships and tar and other by products often left by road. It seems only to have been used for occasional rolling stock carrying oil or tar. 

 Hopefully we will find other industries rather more enthusiastic about a rail link than South Met (later South Eastern) gas.

GW  9/2022

 

Woolwich chimney

the chimneys


One of the most defining features ofan industrial landscape before the 1960s was the number of chimneys. These were mostly smokestacks coming from boilers plus a number of other columns for venting fumes of various sorts. I almost wondered if I should start acompetition showing an old landscape photograph and asking how many chimneys people can see in it.  Between, say 1850 and 1970, there would have been lots and lots.I’m in no way suggesting that nowadays we should have these huge structures sticking hot unfiltered gases up into the atmosphere – but as historians surely we can take a look at them.

A few years ago the Greater London Industrial Archaeology Society put out an appeal for information on remaining industrial chimneys in London.  I don’t have any details on the results but there was a report that over 70 entries were sent in. There are some preserved ones here and there – there is one in the middle of a housing estate just the other side of the River, in Rayleigh Road, Newham, check it out on Streetview.

When I first moved to Greenwich in the 1960s and looked out over the Peninsula there were loads of chimneysstill.  I remember seeing the chimney of Blackwall Point Power Station struck by lightning – but there were so many others that I wasn’treally sure which one it was for a bit.  There was also the big chimney at Greenwich District Hospital – built only in the 1960s, I assume for the hospital boilers. That came down one Sunday morning and it fell, seemingly, in my exact direction.  Another local and more industrialchimney which has come down relatively recently was that on the riverside at Enderby Wharf.

Someone has been writing articles about chimneys in the (national)Industrial Archaeology News. They make the point that historicallychimney building seems be a rather neglected subject. Clearly building these tall stacks requires a lot of knowledge and skill but we know very little about how those skills were developed and who the earliest builders were as factories proliferated from the mid 18th century.  It isn’t just the skill to construct them but there is a whole range of specialist knowledge the builder needs to have – they are unlike a church steeple, for example, because they can’t have an internal support framework and they have to withstand hot gases.  The builder has to know the geography and the micro climate of the site too.   We seem to know a lotaboutblowing them up and pulling them down – with lots of TV shows – but not about how they went up in the first place.  How did people learn to build them so tall?

The articles in IA News are very detailed – and it’s not the easiest of publications to get hold of.  (Check out https://industrial-archaeology.org.  This has some newsletters digitized but the most recent ones aren’t on there yet.)

However, we do have in Woolwich an outstanding preservedchimney.  This is theone from WoolwichDockyard which stillstands in Woolwich Church Street – often with a ‘To Let’ sign on it. Survey of Woolwich says it was built probably in the early 1840s by ‘a specialist chimney engineer, now anonymous’.  It vented all the flues for the Woolwich Dockyard Steam factory.   It was reduced in height later to about 180 ft. and it was later used by the Royal Arsenal Co-operative Society when they had the site in the 20th century.  It is still pretty impressive.    The Historic England listings statement says that there may be tunnels from it which run down to the River.   It would be good to know if this is true.

Now this interest in chimneys has been taken up internationally and most notably by Europa Nostra - The Voice of Cultural Heritage in Europe.  Last year they ran a competition where entrants were invited to video a musical interpretation of the Euro anthem - Beethoven’s Ode to Joy - close to their favourite industrial chimney, See https://vimeo.com/267650942,   and http://european-heritage.co.uk/2018/04/20/serenade-for-a-factory-chimney/.  The resulting entries are also on line and I would very much recommend watching them - although many entries are from tomato paste factories – with billowy singers and one lone trumpeterhttp://www.industrialheritage.eu/EYCH2018/May/Serenade-for-a-Chimney

This year the competition is still for the Ode to Joyperformance but it can be sung under anybody’s favourite industrial monumenthttp://www.europanostra.org/europa-nostras-president-maestro-placido-domingo-renews-his-call-for-contributions-to-the-ode2joy-challenge/

I would love to see us enter an orchestra or one of our resident celebrity rock musicians making a video entry in Woolwich Church Street.  Come on – let’s have a volunteer!


GW 2020??? 





ENDERBY GREENWICH FACTORY

 THE ENDERBYS


 The Enderby family were very numerous but the brothers who bought the rope walk were descendants of the Samuel Enderby who had had an 'oil and white lead' works in Loman Street, in The Borough. He was in the 'oil and Russia' trade, which meant that he processed mutton fat from the Baltic together with oil from whales slaughtered at sea at a plant in Rotherhithe. Oil had all sorts of uses but, in the days before coal gas, was often used for street lighting.

 Samuel married Mary Buxton whose family were ship owners and he took over her family business. His ships went out to hunt whales and by 1790 he was a rich man with sixty-eight whaling ships working in the Southern Oceans.  In the 1790s his son, Samuel, Jnr. lived in a large and impressive house on Crooms Hill.  His mother lived on Blackheath and family members were active in local good causes. It was his sons who bought the Greenwich riverside site.

 The factory consisted of two large waterside buildings where spinning machinery and looms were used to make canvas.  On site were rooms to spin hemp and a flax mill.  Outside was a building for a steam engine and boiler, houses for the foremen, stables, a smithy, and a joinery. There  was a 'pitch house' and the brothers negotiated seven-year contracts with the gas companies for a supply of tar.  There was also a project with the City of London Gas Company for making 'composition,'  usually a coal tar based mortar used by the cheaper end of the building trade. In 1837 Michael Faraday himself gave a lecture in 1837 on the use of naphtha as a solvent for rubber and how it could be applied to new types of rope and cable. Their most famous ship was the 'Samuel Enderby.  For her first voyage an experimental rot proofing was used. This was Kyan’s extremely poisonous sublimate solution,  more usually used as a treatment for syphilis. As a result there was some problems with nausea. Such uses of chemical products still under development in the 1830s shows how open the Enderby brothers were to innovation and the new ideas about chemistry and its development.

This younger generation of Enderbys had money and leisure and many ideas beyond rope and canvas manufacture. Charles Enderby was one of the founders of the Royal Geographical. Enderby crews went to the Southern Oceans in search of whales and in the course of their travels made many important discoveries. Their ships became identified with Antarctic exploration and the stories of the explorers with their, sometimes harrowing, adventures make exciting reading.  They named the new lands which they discovered 'Adelaide Island' after Queen Adelaide, 'Mount William’, after William IV - and, of course, ‘Enderby Land’.

Nevertheless the business was gradually failing

On 8 March 1845, a devastating fire at Enderby Wharf put an end to the family’s involvement in the sail and rope-making business.  The factory's own fire engine fought the blaze joined by two from the Parish, another from the Royal Dockyard and one from the London Fire Brigade Establishment. A detachment of Royal Marines was sent to help but there was never very much hope of saving the ropewalk.  By the next morning all that remained were the 'lofty walls' of the factory - and they were blown down by the high winds in the next few days.   It was said in the Kentish Mercury that the fire was either 'spontaneous combustion' or that it was ‘wilfully raised by some incendiary'.

A small house which may have been on the riverside was also destroyed and by June 1845, building work began on a new riverside house for Charles Enderby possibly on the foundations of the old house. The new house incorporated an unusual ‘Octagon Room’ on the first floor of the north-west corner with an angled bay window and river views. This building is Enderby House which still stands on the river bank.   Charles entertained the rich and famous here.  He had a number of 'curiosities' including a Tudor bedstead and a stuffed 'parson bird' from New Zealand, which, when alive, had been a pet. 

The Enderbys were part of that circle of merchants with strong government and establishment links - the same people who ran Morden College and the East India Company.   Exploration was an expensive business: in theory, it was undertaken to discover new areas for whale fishing but this trade was soon in decline as gas lighting replaced oil, and whales became scarcer.

In 1847 Charles Enderby got a concession to set up a whaling station in the Auckland Islands in Antarctica, the 'Southern Whale Fishery'. It was a short lived and unsuccessful venture in which he, and other members of his family, lost a lot of money and the brothers died in relative poverty.

Nevertheless the manufacture of rope at Enderby Wharf had started something and that was to be in cables.  A business which had begun slightly down river at Morden Wharf was looking for a vacant site to which they could expand.


gw 20